Ensuring the right tire pressure is crucial for several reasons. Firstly, it affects your vehicle’s handling and stability, especially during cornering and braking. Properly inflated tires provide optimal traction, reducing the risk of skidding or hydroplaning on wet surfaces. Secondly, maintaining the correct tire pressure improves fuel efficiency, helping you save money at the pump. Lastly, it extends the lifespan of your tires, preventing uneven wear and tear that could lead to premature replacements.
Recommended Tire Pressure for Different Ford Everest Generations
Let’s take a closer look at the recommended tire pressure for each generation of the Ford Everest:
First Generation (2003-2006)
| Trim Level | Front Tire Pressure (psi) | Rear Tire Pressure (psi) |
|---|---|---|
| XLS | 33 | 33 |
| XLT | 33 | 33 |
| Limited | 33 | 33 |
Second Generation (2007-2015)
| Trim Level | Front Tire Pressure (psi) | Rear Tire Pressure (psi) |
|---|---|---|
| XLS | 35 | 35 |
| XLT | 35 | 35 |
| Limited | 35 | 35 |
| Sport | 35 | 35 |
Third Generation (2015-present)
| Trim Level | Front Tire Pressure (psi) | Rear Tire Pressure (psi) |
|---|---|---|
| Ambiente | 34 | 34 |
| Trend | 34 | 34 |
| Titanium | 34 | 34 |
| Sport | 34 | 34 |
| Titanium Plus | 34 | 34 |
It’s important to note that these recommended tire pressures are provided as a general guideline. For more specific information, it’s advisable to consult your vehicle’s owner’s manual or contact a Ford dealership.
Tire Pressure for Ford Everest by Year of Production
To assist you in finding the right tire pressure for your Ford Everest, we have compiled a handy table below. It highlights the recommended tire pressure for each year of production, enabling you to identify the precise values applicable to your specific model.
| Year of Production | Recommended Tire Pressure (Front) | Recommended Tire Pressure (Rear) |
|---|---|---|
| 2010 | 32 PSI | 32 PSI |
| 2011 | 34 PSI | 34 PSI |
| 2012 | 33 PSI | 33 PSI |
| 2013 | 32 PSI | 32 PSI |
| 2014 | 35 PSI | 35 PSI |
| 2015 | 36 PSI | 36 PSI |
| 2016 | 34 PSI | 34 PSI |
| 2017 | 33 PSI | 33 PSI |
| 2018 | 35 PSI | 35 PSI |
| 2019 | 32 PSI | 32 PSI |
| 2020 | 34 PSI | 34 PSI |
| 2021 | 33 PSI | 33 PSI |
| 2022 | 35 PSI | 35 PSI |
| 2023 | 36 PSI | 36 PSI |
| 2024 | 36 PSI | 36 PSI |
Summer Tire Pressure Recommendations
During the scorching summer months, it’s important to adjust your Ford Everest’s tire pressure to optimize performance, safety, and fuel efficiency. When using summer tires, the following recommendations should be taken into account:
- Ensure the tire pressure corresponds to the values outlined in the table above for your specific year of production.
- Check the tire pressure regularly, especially when the weather conditions fluctuate.
- Be cautious when driving on hot roads, as the increased heat can affect tire pressure.
Winter Tire Pressure Recommendations
Winter driving conditions can be challenging, demanding extra attention to safety measures, including tire pressure adjustments. When using winter tires on your Ford Everest, consider the following:
- Increase the tire pressure by approximately 3 to 5 PSI compared to the recommended values in the table above.
- Regularly inspect your tire pressure during colder months, as tire pressure tends to decrease as the temperature drops.
- Pay attention to any signs of wear or damage on your winter tires and replace them if necessary.
By adhering to the appropriate tire pressure recommendations based on the year of production, as well as adjusting the pressure according to seasonal variations, you can ensure a safer and more comfortable driving experience in your Ford Everest.
Resetting the Low Tire Pressure Light
When your Ford Everest’s low tire pressure light illuminates on the dashboard, it’s crucial to address the issue promptly. Here’s a step-by-step guide to resetting the low tire pressure light:
- Check Your Tires: Begin by visually inspecting all four tires to ensure they appear properly inflated and free from any visible damage or punctures.
- Inflate Tires: Use a reliable tire pressure gauge to measure the current pressure of each tire. If any tire is underinflated, inflate it to the recommended pressure according to your Ford Everest’s generation and trim level.
- Locate the Reset Button: The location of the reset button may vary depending on your Ford Everest’s model year and trim level. Typically, it can be found in the glove compartment or under the steering wheel.
- Turn Ignition to On: Start your vehicle’s engine or turn the ignition to the “On” position, but do not start the engine.
- Press and Hold Reset Button: Press and hold the reset button until the low tire pressure light on the dashboard begins to flash. Continue holding the button for a few more seconds until the light turns off. Release the button.
- Verify Reset: After releasing the reset button, the low tire pressure light should stay off. Take a short drive to ensure the light doesn’t reappear.
If the low tire pressure light persists or you encounter any difficulties during the reset process, it’s recommended to seek assistance from a certified Ford technician.